Valid 70-698 Dumps shared by newpassleader.com for Helping Passing 70-698 Exam! newpassleader.com now offer the newest 70-698 exam dumps, the newpassleader.com 70-698 exam questions have been updated and answers have been corrected get the newest newpassleader.com 70-698 dumps with Test Engine here:

https://www.newpassleader.com/Microsoft/70-698-exam-preparation-materials.html

(130 Q&As Dumps, 30%OFF Special Discount: 30free)

NEW QUESTION NO: 8

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:

All of the client computers run the 64-bit version of Windows 10. User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
Ensure that you can test unsigned device drivers on Computer1

Enable Credential Guard on Computer2.

Run commands and cmdlets remotely on computer2.

Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when

elevated privileges are required.
Ensure that User1 can view and interact with a desktop session of User3.

Ensure that User2 can use Telnet to manage the mainframe.

Ensure that User4 can use Remote Desktop to access Computer4 remotely.


You need to meet the requirement of User4.
What should you do?
A. Install a Universal Windows Platform (UWP) application.
B. Modify the settings of a firewall rule.
C. Install a Windows feature.
D. Modify the membership of a local group.
Answer: D
Section: (none)
Explanation/Reference:
Explanation:

NEW QUESTION NO: 9
You have a computer named Computer1 that runs Windows 10.
File History is turned on.
You have files located in D:\Photos.
You need to ensure that you can recover previous versions of the files in D:\Photos.
What should you do?
A. Add D:\Photos to the Pictures library.
B. Turn on System Protection for drive D.
C. Enable sharing for D:\Photos.
D. Modify the Recovery settings in the Settings app.
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
https://support.microsoft.com/en-us/help/17128/windows-8-file-history

NEW QUESTION NO: 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
While performing maintenance on a computer, you open Indexing Options, and then you click Pause.
You complete the computer maintenance.
You need to resume indexing.
Solution: From the Start menu, you click Power and then you click Restart.
Does this meet the goal?
A. Yes
B. No
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
http://www.techbuzz.in/restart-or-resume-windows-indexing-services-after-pausing.php

NEW QUESTION NO: 11
Your network contains a single Active Directory domain. The domain contains a computer that runs Windows 10.
You plan to use the computer to test applications.
You need to install Windows Insider Preview builds on the computer.
What should you do?
A. From Group Policy, configure the Add features to Windows 10 settings.
B. From the Settings app, configure the Advanced options for Windows Update.
C. From Group Policy, configure the Windows Update settings.
D. From the Settings app, select Developer mode.
Answer: B
Section: (none)
Explanation/Reference:
Explanation:
http://www.howtogeek.com/224826/how-to-become-a-windows-insider-and-test-new-windows-10-features/

NEW QUESTION NO: 12
You have a computer named Computer1.
You obtain a new driver for a device installed on Computer1. The driver package is stored in C:\Drivers and includes the following files:
Driver.inf

Driver.dll

Driver.sys

Driver.cat

You need to install the driver on Computer1 by using File Explorer.
Which file should you use to initiate the installation?
A. Driver.sys
B. Driver.dll
C. Driver.cat
D. Driver.inf
Answer: D
Section: (none)
Explanation/Reference:
Explanation:
Right-click on the .inf file and select Install.

NEW QUESTION NO: 13
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has a virtual hard disk (VHD) named Disk1.vhdx.
You plan to configure Computer1 for dual boot from Disk1.vhdx.
You need to install Windows on Disk1.vhdx by using dism.exe.
What should you run before you install Windows?
A. Add-Windows Image
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-Windows Image
Answer: G
Section: (none)
Explanation/Reference:
Explanation:
https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/boot-to-vhd-- native-boot--add-a-virtual-hard-disk-to-the-boot-menu

NEW QUESTION NO: 14
You have a computer named Computer1 that runs Windows 10.
On Computer1, C:\Folder1 has the permissions configured as shown in the following table.

You share C:\Folder1 as Folder1 and you grant access to the Everyone group.
Folder1 has the following share settings:

What level of access does User1 have to Folder1?
A. User1 cannot see the Folder1 share on the network and cannot connect to Folder1.
B. User1 can see the Folder1 share on the network and can connect to Folder1.
C. User1 cannot see the Folder1 share on the network but can connect to Folder1.
D. User1 can see the Folder1 share on the network but cannot connect to Folder1.
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
https://technet.microsoft.com/en-us/library/jj635727(v=wps.630).aspx

NEW QUESTION NO: 15
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You purchase a new USB drive. You apply a custom image of Windows to the USB drive.
You plan to modify the BIOS setting on a computer so that the computer can start from the USB drive.
You need to ensure that you can start the computer by using the USB drive.
What should you run?
A. Add-Windows Image
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-Windows Image
Answer: C
Section: (none)
Explanation/Reference:
Explanation:

NEW QUESTION NO: 16
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:

All of the client computers run the 64-bit version of Windows 10. User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
Ensure that you can test unsigned device drivers on Computer1.

Enable Credential Guard on Computer2.

Run commands and cmdlets remotely on Computer2.

Configure User Account Control (UAC) on Computer3to prompt administrators for credentials when

elevated privileges are required.
Ensure that User1 can view and interact with a desktop session of User3.

Ensure that User2 can use Telnet to manage the mainframe.

Ensure that User4 can use Remote Desktop to access Computer4 remotely.


You need to meet the Credential Guard requirement of Computer2.
Which two Windows features should you install? Each correct answer presents part of the solution.
A. Windows Process Activation Service (WAS)
B. Embedded BootExperience
C. Isolated User Mode
D. Windows Identity Foundation 3.5
E. Hyper-V Hypervisor
Answer: C,E
Section: (none)
Explanation/Reference:
Explanation:
https://technet.microsoft.com/en-us/itpro/windows/keep-secure/credential-guard

https://blogs.technet.microsoft.com/ash/2016/03/02/windows-10-device-guard-and-credential-guard- demystified/

Instant Access Latest 200-125 Dumps:

https://www.newpassleader.com/Microsoft/70-698-exam-preparation-materials.html