NEW QUESTION NO: 1
A storage unit group is configured that has disk and then tape listed. During a backup session, jobs start retrying and then running on the tape device only.
What is likely cause of the change?
A. The disk storage unit is staging to tape.
B. The tape device was listed first in the storage unit group.
C. The disk storage unit is full.
D. The tape device was listed second in the storage unit group.
Answer: C
NEW QUESTION NO: 2
Refer to the exhibit.
Two media servers, sharing a library with 10 tape drives, exist in the NetBackup environment displayed in the exhibit. Both weekly full and daily differential incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media Server 1 and some back up to Media Server 2. The environment suffers from multiple status 96 failures during the backup window.
How can the administrator minimize the number of failures?

A. configure media multiplexing
B. enable media sharing
C. enable backups to span tape media
D. increase the Media unmount delay
Answer: B
NEW QUESTION NO: 3
A NetBackup Master Server has many backups running each night to an MSDP pool that take a long time to complete.
While these backups are running, replication jobs are queued.
Which action should the administrator perform to ensure replications can occur without waiting for the backups to complete?
A. increase the maximum concurrent jobs for the disk storage unit
B. increase the maximum concurrent jobs in the storage server properties
C. increase the replication job priority
D. increase the maximum I/O streams for the disk pool
Answer: D
NEW QUESTION NO: 4
Which interface is pre-configured with the 192.168.229.233 IP address?
A. lo
B. eth1
C. IPMI
D. eth0
Answer: D
NEW QUESTION NO: 5
Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)
A. Differential Incremental Backup
B. Session Backup
C. Automatic Backup
D. Application Backup
E. Cumulative Incremental Backup
Answer: A,E
NEW QUESTION NO: 6
An administrator is configuring a new MSDP pool on an appliance that contains:
4.5TB of internal storage
36TB external shelf 1
36TB external shelf 2
How should the administrator allocate storage to ensure maximum performance?
A. assign one external shelf to the new MSDP pool as storage, and one external shelf as catalog
B. assign all internal and external storage to the new MSDP pool
C. assign only one external shelf to the new MSDP pool
D. assign both external shelves to the new MSDP pool
Answer: D
NEW QUESTION NO: 7
An administrator has a backup policy with the following attributes:
5 paths listed in the Backup Selections list
3 clients listed in the Clients list
Allow multiple data streams is selected
Max Jobs per Client value set to 4
How many jobs go Active when the job is started, excluding parent jobs?
A. 8
B. 12
C. 9
D. 4
Answer: D
NEW QUESTION NO: 8
Backups of a newly added Windows Server 2008 guest virtual machine are failing with the following status:
156: snapshot error encountered
The associated bpfis process log indicates that the attempt to quiesce this virtual machine failed.
Which two steps should the administrator review to help resolve the issue? (Select two.)
A. verify VMware Tools is installed and running in the virtual machine
B. disable Block-Level Incremental Backup in the policy
C. install the NetBackup plug-in for vSphere Web Client on the guest virtual machine
D. verify Microsoft Volume Shadow Copy Service within the guest virtual machine is working properly
E. enable snapshotting of the virtual machine's memory on the vCenter server
Answer: A,D
Explanation/Reference:
Reference: https://vox.veritas.com/t5/NetBackup/VM-backup-failed-snapshot-error-encountered-156/td- p/721750
NEW QUESTION NO: 9
An administrator has an environment that runs over one thousand jobs a night. Some nights there are hundreds of jobs queued waiting for a resource.
Which action should the administrator take in the event that specific jobs need to run when a resource next becomes available during that evening's backup session?
A. change the job priority for the job in the policy
B. change the job order in the job hierarchy
C. suspend the job and resume the job after changing the policy job priority
D. increment the job priority in the activity monitor for the job
Answer: A
NEW QUESTION NO: 10
An administrator needs to prevent users on all client systems from performing user-directed restores while ensuring they are able to view the contents of all previous backup images.
What should the administrator configure to accomplish this goal?
A. remove the client from the "Restore Failover" list in the Host Properties of the Master Server
B. de-select the "Allow client restore" parameter in the Host Properties of the Master Server
C. modify the auth.conf file on the Master Server to exclude the line: * ADMIN=JBP JBP=ENDUSER+BU
+ARC
D. de-select the "Allow server file writes" parameter in the Host Properties of the Master Server
Answer: A
NEW QUESTION NO: 11
How frequently does content router queue processing (CRQP) run, by default?
A. every 6 hours
B. every 12 hours
C. every 24 hours
D. every week
Answer: B
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000012941
NEW QUESTION NO: 12
Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)
A. define a scratch pool and add all of the volumes to it so NetBackup will move volumes to the other pools as volumes are needed
B. assign volumes to all volume pools as required in the environment
C. define a scratch pool with assigned volumes so NetBackup will move the assigned volumes to other pools as volumes are needed
D. create volume pools as required, but refrain from adding volumes to the pools
E. assign volumes to NetBackup and DataStore volume pools so NetBackup will move the assigned volumes to other pools as volumes are needed
Answer: A,D
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.v95652367_NBU_773
NEW QUESTION NO: 13
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?
A. use Flashbackup-Windows policy type
B. enable the Use Accelerator policy attribute
C. enable Windows Change Journal
D. modify data buffer settings for the data path
Answer: A
NEW QUESTION NO: 14
A policy is created using the Standard policy type. The default settings are used. Linux hosts s1 and s2 are added in the client list and ALL_LOCAL_DRIVES is specified in the Backup Selection.
Host s1 has the mount points listed below:
/
/opt
/usr
/usr/home
Host s2 has the mount points listed below:
/
/proc
/tmp
/usr
How many streams will be created when the policy runs for both clients?
A. five
B. four
C. eight
D. two
Answer: D
NEW QUESTION NO: 15
Which file contains LiveUpdate server configuration?
A. pd.conf
B. bp.conf
C. nblu.conf
D. vm.conf
Answer: C
Explanation/Reference:
Reference: http://www-personal.umich.edu/~danno/symantec/NetBackup_LiveUpdate_Guide.pdf (page
38)
NEW QUESTION NO: 16
Which two storage unit types can be configured in NetBackup? (Select two.)
A. deduplication
B. NDMP
C. robot
D. media manager
E. tape
Answer: D,E
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000012397
NEW QUESTION NO: 17
A NetBackup administrator configures a policy to perform file system backups of multiple client systems using the Allow multiple data streams feature. All other policy attributes are at default settings.
Which Master Server parameter must be configured to enable the backup jobs from a client to run concurrently?
A. Target storage unit: Maximum concurrent jobs
B. Global Attributes: Maximum jobs per client
C. Client Attributes: Maximum data streams
D. Target storage unit: Enable multiplexing
Answer: A
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.DOC2799
NEW QUESTION NO: 18
Which status code applies only to disk storage units?
A. 129
B. 86
C. 219
D. 2805
Answer: A
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.TECH44663
NEW QUESTION NO: 19
Which command can be used to recover the NBDB from the staging location?
A. bprecover
B. bprestore
C. nbdb_restore
D. nbdb_load
Answer: C
Explanation/Reference:
Reference: https://www.veritas.com/support/en_US/article.000109970
NEW QUESTION NO: 20
What should an administrator do to enable backups to span multiple BasicDisk storage units?
A. select Storage Units > Storage Unit > Allow backup to span disks
B. confirm that a load balancing storage unit is selected at the group level
C. configure a storage unit group that consists only of disk storage units defined on a single Media Server
D. configure a storage unit group and add BasicDisk storage units from multiple Media Servers
Answer: D

https://www.examslabs.com/Veritas/VeritasCertification/best-VCS-275-exam-dumps.html