https://www.newpassleader.com/Arista/ACE-A1.2-exam-preparation-materials.html
NEW QUESTION NO: 1
ZTP can retrieve either an EOS configuration file or a script at boot. How does the switch determine of the file being retrieved in a script or a configuration file?
A. If the first line of the file ends with a shebang (#!), the file is a configuration file.
B. If the last line of the file starts with a shebang (#!), the file is a configuration file.
C. If the last line of the file ends with a shebang (#!), the file is a script.
D. If the first line of the file starts with a shebang (#!), the file is a script.
Answer: B
NEW QUESTION NO: 2
When an Arista switch boots with no startup-config and ZTP enabled, before ZTP receives an IP address, in what state are the front-panel interfaces?
A. All interfaces are disabled.
B. All interfaces are shut down.
C. All interfaces are switch ports (switchport).
D. All interfaces are routed ports (no switchport).
Answer: B
NEW QUESTION NO: 3
What is the first command necessary when configuring SSH after entering global configuration mode?
A. line ssh
B. management
C. line vty
D. management ssh
Answer: D
NEW QUESTION NO: 4
When you fullrecover a switch from Aboot and a USB drive is present in the USB port of the switch, which of the following statements is true?
A. Everything on the USB drive is deleted.
B. Only Arista-sourced files are copied from the USB drive to flash: and the switch reboots.
C. If the USB drive contains a fullrecover file and a boot-config file with a timestamp different than the one on USB flash drive, then the USB Drive's contents will be copied to flash, after which the switch will reboot.
D. Nothing. The USB port is disabled when Aboot is active.
Answer: C
Explanation/Reference:
Reference: https://eos.arista.com/password-recovery-return-to-factory-default/ (how to prepare the USB drive)
NEW QUESTION NO: 5
Which of the following commands will show all of the hardware on an Arista switch?
A. show inventory
B. show version
C. show version detail
D. show hardware
Answer: C
Explanation/Reference:
Reference: https://eos.arista.com/how-to-store-and-view-previous-contents-of-show-tech-support/
NEW QUESTION NO: 6
When configuring MLAG, Arista recommends that the trunk group command be used on the VLAN used for MLAG peer communication. What is the purpose of the trunk group command?
A. It groups the MLAG interfaces together so that they can be reported on both peers.
B. It prevents the configured VLAN from leaking out onto other trunks.
C. It groups all the trunks together so that they can traverse the peer-link properly.
D. It ensures that the configured VLAN will be included on all trunks.
Answer: C
NEW QUESTION NO: 7
Where does SysDB store its contents when the switch reboots?
A. /mnt/flash
B. flash:
C. /home/admin
D. none of the above
Answer: B
NEW QUESTION NO: 8
Where does Aboot look for the boot system image at boot time?
A. At the location specified in the running-config
B. At the location specified in the startup-config
C. At the location specified in a file named boot-config on flash:
D. At the location specified in a file named boot_config on flash
Answer: C
Explanation/Reference:
Reference: https://www.safaribooksonline.com/library/view/arista-warrior/9781449358921/ch18.html
NEW QUESTION NO: 9
What is required in order for Multi-Switch CLI to be implemented?
A. an SSD drive to the extensive logging produced by this feature.
B. One or more Arista products with management xmpp enabled.
C. an instant messaging client such as Admium or Trillian
D. an XMPP-based server such as EJabberd
Answer: D
NEW QUESTION NO: 10
Which of the following Tap Aggregation command sessions are correct?
A:
B:
C:
D:
A. Option A
B. Option C
C. Option D
D. Option B
Answer: A
https://www.newpassleader.com/Arista/ACE-A1.2-exam-preparation-materials.html