Valid 300-165 Dumps shared by newpassleader.com for Helping Passing 300-165 Exam! newpassleader.com now offer the newest 300-165 exam dumps, the newpassleader.com 300-165 exam questions have been updated and answers have been corrected get the newest newpassleader.com 300-165 dumps with Test Engine here:
https://www.newpassleader.com/Cisco/300-165-exam-preparation-materials.html
(242 Q&As Dumps, 30%OFF Special Discount: 30free)
NEW QUESTION NO: 1
Which statement about enhanced zoning on Cisco Multilayer Director Switches is true?
A. Enhanced zoning is compatible with IVR.
B. Zone changes can scheduled with a CRON job.
C. It allows patial zone set changes to be distributed without having to active a zone set.
D. More than one zone set can be active wit enhanced zoning.
Answer: C
NEW QUESTION NO: 2
What can be identified by running the switch# show install all impact kickstart bootflash:n5000-uk9- kickstart.4.2.1.N.1.1a.bin system bootflash:n5000-uk9.4.2.1.N1.1a.bin command?
A. the impact of the specified kickstart image on the specified system image
B. whether bootflash is supported for the specified Cisco NX-OS images
C. whether ISSU is supported for the specified Cisco NX-OS images
D. whether the specified system image supports the kickstart image
Answer: C
NEW QUESTION NO: 3
Which option must be configured when you implement a vPC?
A. the peer keepalive link, peer link, and vPC member interfaces
B. the VSS link, peer link, and vPC member interfaces
C. the VSL link, peer link, and vPC member interfaces
D. the CCL link, peer link, and vPC member interfaces
Answer: A
NEW QUESTION NO: 4
Which two options accurately describe the implementation of Fibre Channel domain IDs? (Choose two.)
A. are assigned on a per-line card basis
B. must be unique on all of the Fibre Channel switches in the fabric
C. are assigned on a per switch basis
D. are assigned on a per-VSAN basis
E. must be the same on all of the Fibre Channel switches in the fabric
Answer: B,C
Explanation/Reference:
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/san_switching/6x/ b_5500_SAN_Switching_Config_6x/configuring_fibre_channel_domain_parameters.pdf
NEW QUESTION NO: 5
ipv6 access-list MY_ACL
permit tcp 2001:cc1e:aaaa::/64 2001:cc1e:befe:cccc::/64
permit udp 2001:cc1e:bbbb::/64 2001:cc1e:befe:cccc::/64
interface ethernet 1/1
ipv6 address 2001:cc1e:befe:cccc::1/64
ipv6 traffic-filter MY_ACL in
Refer to the exhibit. Only the ACL in the exhibit is applied on a VDC, and only the default VRF is used. In which two scenarios is traffic permitted?
(Choose two.)
A. GRE traffic from 2001:cc1e:befe:cccc::abcd/64 to 2001:cc1e:aaaa/64
B. TCP traffic from 2001:cc1e:aaaa::/64 to 2001:cc1e:befe:cccc:abcd/64
C. TCP traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc:abcd/64
D. UDP traffic from 2001:cc1e:aaaa::/64 to 2001::cc1e:befe:cccc::abcd/64
E. GRE traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc::abcd/64
Answer: B,E
NEW QUESTION NO: 6
You have a Cisco Nexus 5000 Series switch. Port security is configured to use sticky learning. Where are the secured MAC addresses stored?
A. the running configuration
B. the startup configuration
C. NVRAM
D. RAM
Answer: C
Explanation/Reference:
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/security/513_n1_1/ b_Cisco_n5k_security_config_gd_513_n1_1/ b_Cisco_n5k_security_config_gd_513_n1_1_chapter_01001.html
NEW QUESTION NO: 7
You create a checkpoint on a Cisco Nexus 7700 Series switch. You plan to roll back the running configuration by using the checkpoint. You must ensure that changes are made only if the entire rollback can be applied successfully. Which rollback option should you use?
A. atomic
B. stop-at-first-failure
C. best-effort
D. verbose
Answer: A
Explanation/Reference:
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/ configuration/guide/sm_nx_os_cg/sm_7rollback.html
NEW QUESTION NO: 8
Which two features are required to implement a Layer 3 VXLAN gateway on the Cisco Nexus 5600 Series platform? (Choose two.)
A. feature mpls
B. feature nv overlay
C. feature lldp
D. feature eigrp
E. feature vn-segment-vlan-based
Answer: A,E
Explanation/Reference:
Reference: http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/lxvpn/configuration/ guide/b-l3vpn-cg53xasr9k/b-l3vpn-cg53xasr9k_chapter_0111.pdf
NEW QUESTION NO: 9
Which option must be enabled to implement manual MACsec?
A. CTS and dot1x
B. MSDP and dot1x
C. CTS and MSDP
D. CTS and private VLAN
Answer: A
Explanation/Reference:
Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1/XE_330SG/configuration/ guide/config/swmacsec.html
NEW QUESTION NO: 10
What are two ways to configure the switch ID for Cisco FabricPath? (Choose two.)
A. dynamically by using the POAP protocol
B. manually by using the vPC domain configuration
C. dynamically by using the SNMPv2 protocol
D. dynamically by using the DRAP protocol
E. manually by using global configuration mode
Answer: B,E