Valid 70-741 Dumps shared by ExamsLabs.com for Helping Passing 70-741 Exam! ExamsLabs.com now offer the newest 70-741 exam dumps, the ExamsLabs.com 70-741 exam questions have been updated and answers have been corrected get the newest ExamsLabs.com 70-741 dumps with Test Engine here:
https://www.examslabs.com/Microsoft/MCSA-Windows-Server-2016/best-70-741-exam-dumps.html
(200 Q&As Dumps, 30%OFF Special Discount: 30free)
NEW QUESTION: 1
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two
servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The
solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
On Server1: Create a Run As Account that uses User1.
On Server2: Add User1 to IPAM ASM Administrator Role.
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx
https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx
NEW QUESTION: 2
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name
resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
A. From the properties of Scope1, configure Name Protection.
B. From the properties of Scope1, create an exclusion range.
C. From IPv4, create a new filter.
D. From Control Panel, modify the properties of Ethernet
E. From the properties of Scope1, modify the Conflict detection attempts setting.
F. From the properties of IPv4, configure the bindings.
G. From Scope1 create a reservation.
H. From IPv4, run the DHCP Policy Configuration Wizard.
Answer: E
NEW QUESTION: 3
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and litwareinc.com.
Your company recently deployed DirectAccess for the members of a group named DA_Computers.
All client computers are members of DA_Computers.
You discover that DirectAccess clients can access the resources located in the contoso.com domain
only.
The clients can access the resources in the litwareinc.com domain by using an L2TP VPN connection
to the network.
You need to ensure that the DirectAccess clients can access the resources in the litwareinc.com
domain.
What should you do?
A. Add the servers in litwareinc.com to the RAS and IAS Servers group.
B. From a Group Policy object (GPO), modify the Name Resolution Policy Table (NRPT).
C. From the properties of the servers in litwareinc.com, configure the delegation settings.
D. On an external DNS server, create a zone delegation for litwareinc.com.
Answer: B
Explanation:
https://blogs.technet.microsoft.com/tomshinder/2010/04/01/directaccess-client-location-
awareness-nrpt-name-resolution/
NEW QUESTION: 4
HOTSPOT
Your network contains an Active Directory domain named contoso.com.
The domain contains three servers named Server1, Server4 and Server5 that run Windows Server
2016.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit.
(Click the Exhibit button.)
You configure the replication schedule for \\Contoso.com\Namespace1\Folder1 as shown in the
Replication Schedule exhibit. (Click the Exhibit button.)
Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphics.
Answer:
Explanation:
Start replicating to server4 the next day
Start replicating to server1 immediately
NEW QUESTION: 5
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016.
Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1.
You have the virtual machine shown in the following table.
All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or
VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?
A. On Server2, configure the VLAN ID setting of Switch1.
B. Modify the subnet mask of VM1 and VM2.
C. Configure network virtualization for VM1 and VM2.
D. On Server2, create an external switch and connect VM3 to the switch.
Answer: C
Explanation:
https://blogs.technet.microsoft.com/networking/2016/10/26/network-virtualization-with-ws2016-
sdn/
NEW QUESTION: 6
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS
server named Server1.
Server1 is configured to use a forwarder named Server2 that has an IP address of
NEW QUESTION: 7
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network
adaptors named NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1
connects to vSwitch1. NIC2 connects to vSwitch2 Server1 hosts a virtual machine named VM1. VM1
has two network adapters named vmNIC1 and vmNIC1. VmNIC1 connects to vSwitch1. VmNIC2
connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Name NICTEAM1 TeamMembers vmNIC1, vmNIC2 -TeamingMode $var1
-LoadBalancingAlgorithm $var2
NEW QUESTION: 8
You have an Active Directory domain that contains several Hyper-V hosts that run Windows
Server 2016.
You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.
Which component must you install for the planned deployment?
A. the Data Center Bridging feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/mt403307(v=ws.11).aspx#bkmk_slb
https://www.examslabs.com/Microsoft/MCSA-Windows-Server-2016/best-70-741-exam-dumps.html
NEW QUESTION: 9
You have servers named Server1 and DHCP1. Both servers run Windows Server 2016.
DHCP1 contains an IPv4 scope named Scope1.
You have 1,000 client computers.
You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that
Server1 is used to respond to up to 30 percent of the DHCP client requests only.
You install the DHCP Server server role on Server1.
What should you do next?
A. From Server Manager, install the Network Load Balancing feature.
B. From Server Manager, install the Failover Clustering feature.
C. From the DHCP console, run the Configure Failover wizard.
D. From the DHCP console, create a superscope.
Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/hh831385(v=ws.11).aspx
NEW QUESTION: 10
Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some question
sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The
windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package
Microsoft-NanoServerSCVMM-Package -MediaPath 'D:\ -TargetPath
C:\nano1\Nano1.wim -ComputerName Nano1 - Domainname Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: B
NEW QUESTION: 11
Note: This question is part of a series of questions that use the same scenario.
For your convenience, the scenario is repeated in each question.
Each question presents a different goal and answer choices, but the text of the scenario is exactly the
same in each question in this series.
Your network contains an Active Directory domain named contoso.com.
The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet.
You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names.
What should you name the zone on Server1?
A. . (root)
B. GlobalNames
C. NetBIOS
D. WINS
Answer: B
Explanation:
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx
NEW QUESTION: 12
0.0.10. Server2 can resolve names hosted on the Internet successfully. Server2 hosts a primary
DNS zone named adatum.com.
On Server1, you have the following zone configuration.
The "." zone contains the following records.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
10. You have a DHCP server named Server1.
Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
When you review the address leases in the DHCP console, you discover several leases for devices that
you do not recognize.
You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope.
What should you do?
A. Create a DHCP policy for the scope.
B. Run the Add-DhcpServerv4ExclusionRange cmdlet.
C. Run the Add-DhcpServerv4OptionDefinition cmdlet.
D. Create and enable a DHCP filter.
Answer: B
NEW QUESTION: 13
Your company has 5,000 users who work remotely.
You have 40 VPN servers that host the remote connections for the users.
You plan to deploy a RADIUS solution that contains five RADIUS servers.
You need to ensure that client authentication requests are distributed evenly between the five
RADIUS servers.
What should you do?
A. Install the Failover Clustering role service on all of the RADIUS servers. Configure all of the RADIUS
clients to connect to the IP address of the cluster.
B. Deploy RAS Gateway to a new server. Configure all of the RADIUS clients to connect to RAS
Gateway.
C. Install the Network Load Balancing role service on all of the RADIUS server. Configure all of the
RADIUS clients to connect to a virtual IP address.
D. Deploy a RADIUS proxy to a new server. Configure all of the RADIUS clients to connect to the
RADIUS proxy.
Answer: D
Explanation:
https://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx
NEW QUESTION: 14
Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some question
sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1.
Does this meet the goal?
A. NO
B. YES
Answer: B
NEW QUESTION: 15
You have a DHCP server named Server1.
Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
When you review the address leases in the DHCP console, you discover several leases for devices that
you do not recognize.
You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope.
What should you do?
A. Create and enable a DHCP filter.
B. Create a DHCP policy for the scope.
C. Run the Add-DhcpServerv4ExclusionRange cmdlet.
D. Run the Add-DhcpServerv4OptionDefinition cmdlet.
Answer: C
Explanation: References: https://technet.microsoft.com/en-us/library/jj590721(v=wps.630).aspx
NEW QUESTION: 16
You have a server that is configured as a hosted BranchCache server.
You discover that a Service Connection Point (SCP) is missing for the BranchCache server.
What should you run to register the SCP?
A. setspn.exe
B. Enable-BCHostedServer
C. ntdsutil.exe
D. Reset-BC
Answer: B
Explanation:
https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx
https://www.examslabs.com/Microsoft/MCSA-Windows-Server-2016/best-70-741-exam-dumps.html