https://www.newpassleader.com/Microsoft/70-735-exam-preparation-materials.html

NEW QUESTION NO: 50
You have an image of Windows 10.
You plan to deploy the image to a new computer.
You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image.
You deploy the image to the computer.
You add an application and a driver to the online image.
You need to prepare the computer for the end user.
Which command should you run?
A. sysprep.exe /oobe
B. sysprep.exe /generalize /audit
C. dism.exe /Apply-Image
D. imagex.exe /capture
Answer: A
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windows-to-audit-mode-or- oobe
NEW QUESTION NO: 51
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders. Some of the update packages contain dependencies to the other update packages. You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe/Get-Packages, and then you pipe the output to dism.exe/Add-Package.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-or-remove-packages- offline-using-dism
NEW QUESTION NO: 52
HOTSPOT
You have an image of Windows 10 named Image1.wim. Image1.wim is stored on a USB drive.
When a computer starts from the USB drive, the computer automatically starts an unattended installation of Windows 10.
You start a test computer from the USB drive.
After the deployment completes, you discover the following issues:
A tile is missing from the Start menu.

The label for volume C is incorrect.

You need to update the configuration files to resolve the issues.
Which configuration file should you modify to resolve each issue? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Answer: 

NEW QUESTION NO: 53
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 for a new desktop computer model.
You plan to deploy the computer to two regions.
You need to add a language interface pack to the image.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: C
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-and-remove-language- packs-offline-using-dism
NEW QUESTION NO: 54
You have an image of Windows 10 that runs the Windows 10 Anniversary Update.
You plan to deploy the image to several new computers.
You add Microsoft Office 2016 to the image.
You need to ensure that when the image is deployed, users will see the Office 2016 tiles on the Start menu as shown in the exhibit. (Click the Exhibit tab.)

What should you do?
A. Create a LayoutModification.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft
\Windows\Shell\ folder.
B. Modify the DefaultLayouts.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft
\WindowsApps\ folder.
C. Modify the DefaultLayouts.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft
\Windows\Shell\folder.
D. Create a LayoutModification.xml file and save the file in the C:\Users\Default\AppData\Local\Microsoft
\WindowsApps\ folder.
Answer: A
Explanation/Reference:
Explanation:
NEW QUESTION NO: 55
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You have a network share that contains the driver files. Each driver is comprised of an INF file and several DLL files.
You need to add the drivers to computers that are installed by using the Windows 10 image. You must achieve the goal without adding the drivers to the image.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: D
Explanation/Reference:
Explanation:
NEW QUESTION NO: 56
You are preparing a push-button reset solution.
You extract a Windows Recovery Environment (Windows RE) boot image from an image of Windows 10.
You plan to use scanstate.exe to capture several Windows desktop applications.
Which two folders from the Window Assessment and Deployment Kit (Windows ADK) should you include in the Windows RE build environment?
A. User State Migration Tool (USMT) and Windows Preinstallation Environment
B. Windows Preinstallation Environment and Common
C. User State Migration Tool (USMT) and Windows Setup
D. Windows Setup and Deployment Tools
Answer: C
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-push-button-reset- features
NEW QUESTION NO: 57
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a custom image of Windows 10.
You need to deploy the image to a computer.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: F
Explanation/Reference:
Explanation:
NEW QUESTION NO: 58
HOTSPOT
You plan to deploy an image of Windows 10 to several computers by using an answer file.
You need to identify which configuration pass you must use to configure each of the following settings:
Manufacturer in the Microsoft-Windows-Shell-Setup component.

UILanguage in the Microsoft-Windows-International-Core component

Which configuration pass should you use for each setting? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Answer: 

NEW QUESTION NO: 59
You use an answer file to automate the installation of Windows 10.
You need to add your company's support information to computers that you deploy.
Which component should you add to the answer file?
A. Microsoft-Windows-Setup
B. Microsoft-Windows-PnpCustomizationsNonWinPE
C. Microsoft-Windows-Shell-Setup
D. Microsoft-Windows-Deployment
Answer: C
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/customize/desktop/unattend/microsoft-windows-shell- setup-oeminformation
NEW QUESTION NO: 60
You have a computer named Computer1 that runs Windows 10.
On Computer1, you have a DVD that contains the installation source files of Windows 10 Pro.
You open Windows System Image Manager as shown in the exhibit. (Click the Exhibit tab.)

You need to configure the answer file for Windows 10 by using Windows System Image Manager (Windows SIM).
What should you do first?
A. Copy the installation files for Windows 10 to a hard disk.
B. Create a catalog file (.clg).
C. Select a distribution share.
D. Select an image of Windows 10.
Answer: A
Explanation/Reference:
Explanation:
References:
https://technet.microsoft.com/en-us/library/cc749317(v=ws.10).aspx

https://www.newpassleader.com/Microsoft/70-735-exam-preparation-materials.html