NEW QUESTION NO: 50
Which request obtains the switchname, in JSON format, from a Cisco Nexus device via the NX-API?
A:

B:

C:

D:

A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Explanation/Reference:
Explanation:

NEW QUESTION NO: 51
Which four options are part of Cisco ONE Enterprise Cloud Suite product portfolio? (Choose four.)
A. Application Policy Infrastructure Controller
B. Cisco UCS Director
C. Cisco PrimeService Catalog
D. Cisco Virtual Application Container Services
E. Cisco Intercloud Fabric for Business
F. Cisco Open SDN Controller
G. Cisco ASA
H. Cisco WAAS
Answer: B,C,D,E
Explanation/Reference:
Explanation:

NEW QUESTION NO: 52
Which two options are network considerations for common VXLAN deployments? (Choose two.)
A. MTU size in the transport network
B. consistent VNI-to-group mapping
C. placement of VXLAN tunnel endpoints
D. multicast group scaling
E. consistent VLAN-to-VN-Segment mapping
Answer: A,D

NEW QUESTION NO: 53
Which three statements are considered best practice when directly connecting converged network adapters to the fabric? (Choose three.)
A. Cisco Unified Fabric links must be configured as access ports and FCoE VLAN must not be configured as a native VLAN.
B. Separate FCoE VLANs must be used for FCoE in SAN-A and SAN-B.
C. If MSTP is enabled, a separate MST instance must be used for FCoE VlANs.
D. If the converged access switches (in the same San fabric or in the other) must be connected to each over Ethernet links for the purposes of LAN alternate pathing, then sucj links must explicitly be configured to include all FCoE VLANs. This configuration ensures to extend the scope of the Spanning TreeProtocol for FCoE VLANs to Cisco Unified Fabric and non Cisco Unified Fabric links.
E. Cisco UF links must be configured as spanning-tree edge ports.
F. A shared VLAN can be used to carry traffic for each virtual fabric in the SAN (for example, VSAN 1, VSAN 2, and so on).
Answer: B,C,E
Explanation/Reference:
Explanation:

NEW QUESTION NO: 54

Refer to the exhibit. Which two statements about this output are true? (Choose two.)
A. Outputs shown are redirected to the logging flash.
B. Ethanalyzer is a licensed feature.
C. Outputs are for all traffic going to the SUP.
D. Outputs indicate the traffic passing from one module to another (non-SUP).
E. Ethanalyzer is available in all CISCO IOS/NX-OS/IOS-XR devices.
F. Outputs can be filtered using Wireshark filters.
Answer: C,F
Explanation/Reference:
Explanation:

NEW QUESTION NO: 55
Which two Layer 4 - Layer 7 parameters are needed to do route peering with a Layer 4 - Layer 7 service device in Cisco ACI? (Choose two.)
A. A valid router configuration must be set under the service graph template.
B. A router ID must be assigned under the Layer 4-Layer 7 device.
C. The connector type must be set to "Layer 2 Peering".
D. Under the device interface, the path must be selected.
E. Under the device interface, the L3 Out must be selected.
Answer: A,D

NEW QUESTION NO: 56
Which state is the optimal health state for an APIC cluster?
A. fully fit
B. fully sync'd
C. in-sync
D. in service
Answer: A
Explanation/Reference:
Explanation:

NEW QUESTION NO: 57
In OpenStack, which project stores and retrieves arbitrary unstructured data objects?
A. Swift
B. Keynote
C. Nova
D. Cinder
Answer: A

NEW QUESTION NO: 58
Which two statements about UCS switch mode are true? (Choose two.)
A. Disjoint Layer 2 networks are supported only when the Ethernet switching mode of the fabric interconnects is configured for switch mode.
B. Server-to-server multicast and broadcast traffic is sent through all uplink ports in the same VLAN.
C. Broadcast packets flood out of all ports except the port that it was received on.
D. Switch mode is the default Ethernet switching mode.
E. Ethernet switching mode must be used only if the fabric interconnect is connected directly to a router.
Answer: B,C
Explanation/Reference:
Explanation:

NEW QUESTION NO: 59
Which two guidelines and limitations of PTP on Cisco NX-OS are true? (Choose two.)
A. PTP supports multicast, unicast, and anycast communication.
B. PTP can be enabled only on F- and M-Series module ports.
C. PTP is limitless per network.
D. Only one PTP process can control all of the port clocks through the clock manager.
E. PTP supports transport over UDP. Transport over Ethernet is not supported.
Answer: D,E
Explanation/Reference:
Reference:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/ configuration/guide/sm_nx_os_cg/sm_ptp.pdf

NEW QUESTION NO: 60
Which two options are valid span configurations for a Cisco Nexus 1000 Series Switch? (Choose two.)
A. n1000v(config)#monitor session 3n1000v(config-monitor)#source interface ethernet 2/1-3n1000v (config-monitor)#source vlan 3, 6-8 txn1000v(config-monitor)#filter vlan 3-5, 7n1000v(config-monitor)
#destination interface ethernet 2/5
B. n1000v(config)#monitor session 3n1000v(config-monitor)#source interface ethernet 3/1n1000v(config- monitor)#source vlan 3, 6-8 txn1000v(config-monitor)#filter vlan 3-5, 7n1000v(config-monitor)
#destination interface ethernet 3/2
C. n1000v(config)#monitor session 3n1000v(config-monitor)#source interface ethernet 3/1-3n1000v (config-monitor)#source vlan 3, 6-8 txn1000v(config-monitor)#filter vlan 3-5, 7n1000v(config-monitor)
#destination interface ethernet 2/5
D. n1000v(config)#monitor session 3n1000v(config-monitor)#source interface ethernet 2/1-4n1000v (config-monitor)#source vlan 3, 6-8 txn1000v(config-monitor)#filter vlan 3-5, 7n1000v(config-monitor)
#destination interface ethernet 2/2
E. n1000v(config)#monitor session 3n1000v(config-monitor)#source interface ethernet 2/1-3n1000v (config-monitor)#source vlan 3, 6-8 txn1000v(config-monitor)#filter vlan 3-5, 7n1000v(config-monitor)
#destination interface ethernet 3/5
Answer: A,B
Explanation/Reference:
Explanation: